Find It Fast Menu

Return to our Home page

General Information

Read Our Info (Click here if you don't see what you want below!)

External Links

Special & New Page Additions

Personal

SPOT SOLVER Helps Page

(A text copy from the Carpet-Rug Institute's page, http://carpet-rug.com/  should their page ever be down.)

No one likes it when there is a spill on the floor, but with the help of the CRI, it can be cleaned before becoming a permanent part of the carpet. The information listed below will prepare you to properly deal with spills and keep your carpet clean for years to come.

Act Quickly! Most carpet available today has been treated with a stain-resist treatment, so many spills can be removed if immediate action is taken. The longer the delay, the higher the probability of a spill becoming a permanent stain. Remember, staining is influenced by many factors, and no carpet is completely stain proof.

Blot liquids with a dry, white, absorbent cloth or white (no printing) paper towels.

Do not scrub the area! Scrubbing can cause pile distortion in the affected area. Continue to use a dry cloth or paper towels until the area is completely dry. For semi-solids, gently scrape up with a rounded spoon. Solids should be broken up and vacuumed until completely removed.

If the spot can be identified, locate the substance in the spot removal computer and follow the directions carefully.

Pretest any spot removal agent in an inconspicuous area to make certain the solution will not damage the fiber or the dye. After applying several drops to the testing area, hold a white cloth on the wet area for 10 seconds. Examine the carpet and cloth for color transfer, color change, or damage to the carpet. If a change occurs, another cleaning solution should be selected.

Apply a small amount of the selected cleaning solution to a white cloth, allow to sit for about 10 minutes and work in gently. Work from the edges of the spill to the center to prevent the spill from spreading. Do not scrub! Blot, absorbing as much as possible, and repeat if necessary.

Continue using the first cleaning solution as long as there is a transfer of the spill to the cloth. It is not necessary to use all of the cleaning solutions if the first solution removes the spill. Be patient! Complete removal of the spill may require repeating the same step several times.

After the spill has been completely removed, rinse the affected area thoroughly with cold water, and blot with a dry cloth until all of the solution has been removed. Some cleaning solutions will cause rapid soiling if the solution is not completely removed. Apply a one-half inch layer of white paper towels to the affected area, and weigh down with a flat, heavy object. Continue to change paper towels as needed.

A dry, absorbent, cleaning compound may be used as a substitute to accelerate drying time.

For more detailed information on a specific spill, please search on the pull-down menu at left.

Many fiber manufacturers provide a toll-free cleaning assistance and advice (consult your warranty), or phone CRI for assistance.

[This page copied from http://www.carpet-rug.com/drill_down_2.cfm?page=5&sub=1]

Difficult Stains

Acid Substances
Strong acids, such as battery acids and some tile cleaning compounds, if spilled on a carpet, require prompt action to prevent serious damage. First, flush the affected area with water. Sponge up the excess and repeat the process several times until the acid has been diluted and washed away. Finally, sponge the area with a solution prepared by adding one (1) tablespoon of baking soda to one (1) quart of warm water. Rinse again. Dry the carpet as quickly and thoroughly as possible.

Blood
To remove blood, use only cool cleaning solutions to prevent setting the stain. Removal of bloodborne pathogens may require the assistance of a carpet cleaning professional.

Burns
Burn damage can be remedied only by reweaving, retufting, or resectioning the damaged area. However, the appearance of an area of charred carpet can be improved by carefully clipping off blackened ends of tufts using small, sharp scissors. Trim surrounding tufts to minimize indentation.

Chewing Gum
Heat gum with an electric hair dryer using caution not to melt the fiber. Allow softened gum to adhere to a plastic sandwich bag and lift from carpet. Apply methyl salicyclate (i.e. Extra Strength Ben Gay) and repeat the process. When gum is fully removed, clean the area with a detergent solution followed by a warm water rinse. Repeat if necessary.

Dye Stains
Many beverages, medicines, cosmetics, foods, and other liquids contain dyes. These dyes may be absorbed into the fibers making removal very slow or impossible. Follow dye spot removal procedures on the spot chart. If removal does not appear to be possible, call your carpet cleaning professional for advice. Sometimes the stain can be hidden by spot dyeing, retufting, or by repairing the affected area.

Fingernail Polish
Use a non-acetate fingernail polish remover. Apply a small amount of the fingernail polish remover to a white cloth, and work in gently - do not rub - working from the edges of the spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient, blotting the area several times.

Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the carpet fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

Whenever using a cleaning solution on your carpet, make sure you pre-test the spot removal solution (for color transfer to the cloth or damage to the carpet) in an inconspicuous area.

Ink (Ballpoint Pen)
Follow recommended procedures on the Spot Removal Chart to contain the spill using rubbing alcohol as the dry cleaning solvent. Rubbing alcohol (90% isopropyl) can be used as a dry cleaning solvent by applying with a cloth or towel. Do not pour rubbing alcohol directly onto the carpet.

Mustard
Some mustards contain very strong dyes that are difficult to remove. It may be necessary to remove the stained area and reinsert an undamaged section of carpet.

Rust
Rust almost always requires professional service because the chemicals required are hazardous when used improperly. If the stain is fresh, the spot removal procedures on the stain chart may be successful.

[Copied from http://www.carpet-rug.com/drill_down_2.cfm?page=5&sub=2]